PMC-E Evaporative Condenser

Product Images
PMC-E Evaporative Condenser
PMC-E Evaporative Condenser installation
PMC-E Evaporative Condenser Mr. Goodtower

The PMC-E features Thermal-Pak II® Coil with CrossCool™ Internal Tube Enhancement for increased internal heat transfer coefficient of the coil and thus increased the cooling capacity of the unit. The PMC-E offers the most models and box sizes in the industry and is designed with IBC Compliant Construction.

  • CrossCool enhanced for greater heat exchange
  • 50% reduction in energy consumption compared to traditional centrifugal fan condenser models
  • Ranging in capacity from 175 to 1,985 nominal tons
  • IBC Compliant – Independently certified by the International Building Code to withstand seismic and wind load forces in North America

The refrigerant gas discharges from the compressor into the inlet connection of the PMC-E condenser. Heat from the refrigerant dissipates through the coil tubes to the water cascading downward over the tubes. Simultaneously, air is forced in through the two-stage vane axial fans at the base of the condenser and travels upward through the coils, opposite the water flow. A small portion of the water evaporates, removing heat from the system; the saturated hot air is discharged to the atmosphere. The remaining water falls to the sump at the bottom of the condenser where it is recirculated by the pump up through the water distribution system and back down over the coils.

Thermal-Pak II Coil

EVAPCO's patented Thermal-Pak II coils assures maximum cooling capacity. The airflow through the coil is counterflow to the fluid flow, providing the most efficient heat transfer process. A special coil design is utilized to reduce the air pressure drop through the unit while maximizing tube surface area and increasing its heat transfer capabilities.

  • Elliptical return bends allows for more circuits per coil bundle increasing the maximum capacity per footprint
  • Coil located in airstream increasing dry bulb switchover temperature
  • CrossCool Internal Tube Enhancement increase fluid turbulence providing additional evaporative capacity
  • Available in type 304 SS or type 316 SS construction
Drift Eliminators
  • Limits the drift rate to less than 0.001% of the recirculating water rate
  • Limit the potential of spreading Legionella
  • Constructed of an inert polyvinyl chloride (PVC)
Pressurized Water Distribution System

EVAPCO's Zero Maintenance ZMII® spray nozzle remains clog free while providing even and constant water distribution, providing the industry's best performing non-corrosive, maintenance-free water distribution system.

  • ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" splash plate clearance
  • Mounted in corrosion-free PVC water distribution pipes that have threaded end caps
  • Provides unequaled coil coverage and scale prevention
Stainless Steel Options
  • Available in Type 304 or Type 316 Stainless Steel
  • Available in various levels to give the protection you need
FACTORY-MOUNTED Water Treatment Systems

Available with FACTORY-MOUNTED water treatment systems, providing environmentally sensitive alternatives for treating water in evaporative cooled equipment.

  • SmartShield solid chemical water treatment system
Maintenance Accessories

Available with multiple equipment options to aid in the maintenance of the condenser.

  • External Service Platform
  • Ladder
  • Perimeter Handrails
  • Sump Sweeper Piping
  • Oversized access doors
Name File Size Type Language
全系列冷凝器产品概述 6.91 MB 样本 Chinese
全系列冷凝器产品概述 6.91 MB 样本 Chinese
制冷剂管道手册 9.69 MB 样本 Chinese
检修维护表 - 闭式冷却塔及蒸发式冷凝器 3.97 MB 运行维护手册 Chinese
设备布置说明书 15.15 MB 布置 Chinese
运行维护手册-闭式冷却塔及蒸发式冷凝器 29.37 MB 运行维护手册 Chinese
Product Model filter

Media name Drawing Type Drawing Format Product Model
PMC-1013E Steel Support (English) Steel Support Print (.pdf) PMC-1013E
PMC-1013E Steel Support (Metric) Steel Support Print (.pdf) PMC-1013E
PMC-1013E Unit Certified (English) Unit Certified Print (.pdf) PMC-1013E
PMC-1013E Unit Certified (Metric) Unit Certified Print (.pdf) PMC-1013E
PMC-1024E CAD Drawing CAD Drawing CAD Drawing (.dwg) PMC-1024E
PMC-1024E REVIT/3D Model Revit/3D Model Revit/3D Model (.rfa) PMC-1024E
PMC-1024E Steel Support (English) Steel Support Print (.pdf) PMC-1024E
PMC-1024E Steel Support (Metric) Steel Support Print (.pdf) PMC-1024E
PMC-1024E Unit Certified (English) Unit Certified Print (.pdf) PMC-1024E
PMC-1024E Unit Certified (Metric) Unit Certified Print (.pdf) PMC-1024E